29
CQube MF & LF
Wash these parts
Reassemble mixing system
The fl at side of the whipper shaft must
correspond with the marked arrow on the
whipper.
To t the whipper push onto the shaft until a click
sound can be heard. It is only possible to assemble
the whipper in one way.
Fix the mixing bowl and condensation trap. Push-
t the mixing bowl and x with lever.
Connect the outlet hose.
All parts must be dry before reassembly.
Weekly Cleaning
CLEANING AND CARE
0201
03
04
Mixing Bowl Condensation Trap Mounting Plate Whipper
Clean with a moist
cloth and wipe dry.
Ensure that all water hoses have
been connected and fi tted.
Check all seals (red) before
reassembly of parts.
Note
To Next Page
Loading...
