Wheel Installation
1. With the transmission in gear and the parking brake locked,
place the wheel in the correct position on the wheel hub. Be
sure the valve stem is toward the outside and rotation arrows
on the tire point toward the front.
2. Attach the wheel nuts and finger
tighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts
according to the chart found in
―16.MAINTENANCE/Wheel Nut Torque‖.
Tire Inspection
When replacing a tire always use original tire size and type.
Tire Tread Depth
Always replace tires when tread depth is worn to 1/8‖ (3mm) (1)
or less. Please refer to your Owner’s Manual for tire
specifications.
94
To Next Page
Loading...
