4. DAILY PRE-RIDE INSPECTION
WARNING
You must inspect your ATV each time before riding to ensure it is
in proper working order. If proper inspection is not done, severe
injury or death could result.
working order each time you ride.
Item/Inspection procedure
1. Tire-check condition and pressures.
3. All brakes-check operation, adjustment and fluid level
(includes auxiliary brake).
4. Throttle-check for free operation and closing.
5. Headlight / Taillight / Brake light-check operation of all
indicator lights and switches.
6. Engine stop switch-check for proper function.
7. Wheels-check for tightness of wheel nuts and axle nuts; check
that axle nuts are secured by cotter pins.
9. Steering-check for free operation noting any unusual
looseness in any area.
10. Loose parts-visually inspect vehicle for any damaged
components or loose nuts/bolts or fasteners.
11. Operators helmets, goggles and clothing.
12. Engine coolant check for proper level at the recovery bottle.
12
Use the following checklist to verify your machine is in proper
2. Fuel tank-fill the fuel tank to its proper level.
8. Air cleaner element-check for dirt; clean or replace.
To Next Page
Loading...
