16. MAINTENANCE
Rear and Auxiliary Brake
Rear Brake
The rear brake is a hydraulic disc type brake which is activated by
the same pedal which activates the front brake system is self
adjusting and requires no maintenance other than periodic
checks of the pads for wear
l Pads should be changed when the friction material is worn to
3/64”(1mm).
l Inspect the brake disc spline and pad wear surface for
excessive wear.
Auxiliary Brake Systems
Your ATV’s auxiliary brake system is intended to be used as a
backup for the main brake system. Should the main system fail,
the rear brake can be activated by the brake lever being moving
toward the handlebar. The hydraulic brake system will not require
adjustment.
NOTE: Since this is a rear brake only, it will not be as effective as
the all wheel system
86
To Next Page
Loading...
