Coleman xt260 - Control and Part Functions; Main Switch; Hazard Light Switch; Engine Start Button

7.CONTROL AND PARTS FUNCTIONS
Electrical Switches
1. Main Switch -This key switch must be turned clockwise to the
“on” position to start the engine.
2. Hazard Light Switch –When the switch is pushed to “ “ ,
the four signal lights are on and the buzzer is sounding.
3. Engine Start Button-To start the engine.
this vehicle is equipped with a reverse speed limiter system. To
obtain additional power while backing up, depress the override
button. WARNING: Never activate the override button while
throttle is open as loss of control may result, causing sever
personal injury or death.
31
＊Override Switch (Reverse Speed Limiter)-Some versions of