Colorlight X16 User Manual

www.colorlightinside.com
24
In the cropping setting submenu of HDMI or DVI1/2/3/4 or SDI1/2, press the knob/OK to
turn the cropping function on or off. If Enable has been switched on, you can rotate the
knob to set the row starting point (X), the column starting point (Y), and the width and height
of the signal image, and then select Save.
5.3.4 Preset Setting
Rotate the knob and select Preset Setting to enter the Preset Setting submenu.
In the submenu, you can turn the Broadcast function on or off, and save 16 preset
parameters, every one of which includes the following parameter information: scaling,
cropping, multi-window display, picture adjustment and 3D. You can also directly load the
saved preset parameter to display the image based on your specific need without the need
to setting the parameters of video sources again. After restoring factory settings, 4 preset
parameters have been preset in the controller.

Colorlight X16 Specifications

General

Brand	Colorlight
Model	X16
Category	Controller
Language	English