InteliATS
NT
PWR, SW version 1.0, ©ComAp – March 2009 7
IA-NT- PWR-1.0-Reference Guide R1.pdf
Description
Description of the controller system
InteliATS
NT
is a comprehensive Automatic Transfer Switch controller designed to monitor the incoming
AC mains supply (1 or 3 phases) for under & over voltage, under & over frequency and voltage
unbalance. In the case of any mains supply disproportion it will send a remote start command to the
gen-set and make change over for both generator and mains contactors. The gen-set requires a
remote start type control unit (e.g. the ComAp InteliLite
NT
MRS 10 controller), at least a key-start box
with an external input for the start/stop signal.
InteliATS
NT
controllers are equipped with a powerful graphic display showing icons, symbols and bar-
graphs for intuitive operation, which sets, together with high functionality, new standards in Gen-set
controls.
The key features are:
• Easy-to-use operation and installation. Factory default configuration covers most of
applications
• Different customer changes are possible thanks to the configurability
• Excellent remote communication capabilities
• High reliability
Example application
To Next Page
Loading...
Need help?
General
