IGS-NT Communication Guide
52
Image 4.3 AirGate connection screen
4.3 WebSupervisor
WebSupervisor is web based system designed for monitoring and controlling ComAp controllers via the
internet. This system offers a number of beneficial features that help optimize revenue for machinery fleets, as
each piece of equipment can be individually monitored for all important operation values.
Controllers
Controllers IG-NT-BB IG-NTC-BB IS-NTC-BB IM-NTC-BB IM-NT-BB
Connectionapplicable YES YES YES YES YES
Available ports
external
bridge IB-
NT
ETHERNET ETHERNET ETHERNET
external
bridge IB-
NT
More info IG/IS/IM-NTC-BB - Communications (page 12)
Controllers IG-NT IG-NTC IS-NT-BB IM-NT
Connectionapplicable YES YES YES YES
Available ports
external bridge IB-
NT
external bridge IB-
NT
external bridge IB-
NT
external bridge IB-
NT
WebSupervisor connection settings
Connection of controllers with direct Ethernet port can be realized two diferent ways:
Internet connection via AirGate: No fixed and public IP address is needed. Connect and set the controller
the same way as for Internet connection via AirGate (page 49).
Internet connection without AirGate: Controller has to have fixed and public IP address. Connect and set the
controller the same way as for Direct PC connection to Single gen-set (page 24).
Connection of all controllers can be realized using IB-NT external bridge.
To Next Page
Loading...
Need help?
General
