ComAp InteliGen NT Communications Guide

IGS-NT Communication Guide
43
Controllers
Controllers IG-NT-BB IG-NTC-BB IS-NTC-BB IM-NT-BB IM-NTC-BB
Connection
applicable
YES YES YES YES YES
Available
ports
RS232onI-LB+
RS485 on I-LB+
RS232onI-LB+
RS485 on I-LB+
RS232onI-LB+
RS485 on I-LB+
RS232onI-LB+
RS485 on I-LB+
RS232onI-LB+
RS485 on I-LB+
More info Comms extension - I-LB+ Local bridge (page 64)
Controllers IG-NT IG-NTC IS-NT-BB IM-NT
Connection
applicable
NO YES YES NO
Available
ports
RS232 on I-LB+
RS485 on I-LB+
RS232 on I-LB+
RS485 on I-LB+
RS232 on I-LB+
RS485 on I-LB+
RS232 on I-LB+
RS485 on I-LB+
More info Comms extension - I-LB+ Local bridge (page 64)
Equipment
Equipment needed
Controller side I-LB+ unit
Connection RS232 cable (page 83), RS 485 cable (page 82)
PC side
RS232 connection or RS232/USB converter
RS485 connection or RS485/USB converter
3.4.3 Ethernet - MODBUS (IB-NT)
Up to 32 controllers can be monitored via one IB-NT. Response time of a system with this type of connection
depends on number of controllers, higher number of controllers means slower system response time.

ComAp InteliGen NT Specifications

General

Brand	ComAp
Model	InteliGen NT
Category	Controller
Language	English