ComAp InteliGen NT Communications Guide

IGS-NT Communication Guide
32
Controllers
Controllers IG-NT-BB IG-NTC-BB IS-NTC-BB IM-NT-BB IM-NTC-BB
Connectionapplicable YES YES YES YES YES
Available ports
RS232 on ILB+
RS485 on ILB+
RS232 on ILB+
RS485 on ILB+
RS232 on ILB+
RS485 on ILB+
RS232 on ILB+
RS485 on ILB+
RS232 on ILB+
RS485 on ILB+
More info
Comms extension - I-LB+ Local bridge (page 64)
Controllers IG-NT IG-NTC IS-NT-BB IM-NT
Connectionapplicable YES YES YES YES
Availableports
RS232 on I-LB+
RS485 on I-LB+
RS232 on I-LB+
RS485 on I-LB+
RS232 on I-LB+
RS485 on I-LB+
RS232 on I-LB+
RS485 on I-LB+
More info Comms extension - I-LB+ Local bridge (page 64)
Equipment
Equipment needed
Controller side I-LB+ unit (see Comms extension - I-LB+ Local bridge on page 64)
Connection RS232 cable (page 83) or RS 485 cable (page 82)
PC side
RS232 connection or RS232/USB converter
RS485 connection or RS485/USB converter
3.2.3 USB connection via I-LB+ module
Note: Comms extension - I-LB+ Local bridge (page 64) enables monitoring and configuration up to 32
controllers interconnected via CAN(2) intercontroller bus. It is also possible to use I-LB+ for single controller
connection.

ComAp InteliGen NT Specifications

General

Brand	ComAp
Model	InteliGen NT
Category	Controller
Language	English