ComAp IS-NTC-BB Reference Guide

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
278
Binary input: Timer block 10
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #10.
NOTE:
See also the setpoint TimerChannel 10 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 11
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #11.
NOTE:
See also the setpoint TimerChannel 11 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 12
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #12.
NOTE:
See also the setpoint TimerChannel 12 and output TimerAct 9-12.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 13
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #13.
NOTE:
See also the setpoint TimerChannel 13 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Binary input: Timer block 14
Related FW
3.0
Description
This input is used to disable temporarily the output from the Timer channel #14.
NOTE:
See also the setpoint TimerChannel 14 and output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.

ComAp IS-NTC-BB Specifications

General

Brand	ComAp
Model	IS-NTC-BB
Category	Controller
Language	English