Comelit HFX-700M KIT - Install Door Camera; HFX-700 M Wiring and Setting

15
A. Open the hidden latch, and unscrew to remove door camera unit from
bracket.
B. Fasten wall mount bracket to the surface where the unit will be installed.
C. Fasten wires on terminals and select jumpers for desired function
(Refer to 3.6).
D. Mount door camera unit back on the bracket and secure the assembly
screw.
3.3. Install door camera
Door camera Bracket
Pull out screw cover
to access the screw
Screws wrench
PT1
PT2
DG1
DG2
OUT+
OUT-
DR2
DR1
POWER
<+>
<->
JP1
JP2
1
2 3 4
Main monitor
Wiring terminal
Red
Black
1
2
4
5
door camera
Wiring terminal
3
6
7
8
9
3.4.HFX-700M wiring and setting
A. Wire the system from terminal to terminal accordingly.
1
2
3
4
5
6
7
8
9
Connect to a N.C. magnetic switch sensor for
door status detection.
Trigger a N.O. external chime or strobe light which is synchronized
with door bell trigger.
Terminals for expansion monitor(w/polarity)
Terminals for the 2nd doorbell camera (EX-700D) or EX-VIN (no polarity)
Terminals for the 1st doorbell camera (EX-700D) or EX-VIN (no polarity)
Terminals for power adapter
Terminals to main monitor (no polarity)
Terminals for door strike
Electric Lock