33
b) Protection fuse.
This device stops operation of the motor pump in the event of overcurrent.
In the event of intervention, proceed as follows, observing the instructions given in the manual of the
machine that incorporates the motor pump:
• stop the machine and disconnect the power supply;
• purge any residual pressure from the high pressure circuit;
• replace the fuse (also refer to the section
“SPECIFICATIONS AND TECHNICAL DATA”
;
• reconnect the power supply and repeat the start-up procedure.
CAUTION
• In the event of repeated intervention, do not use the motor pump (and therefore the machine that
incorporates it) without rst having it checked by a
Specialist Technician
.
STANDARD EQUIPMENT
Ensure that the product you have purchased consists of the following items:
• wheelbarrow with selected CBM module;
• Hose reel (if option has been chosen);
• sprayer lance;
• delivery hose;
• EVERFLO motor pump manual
• CBM module manual;
• wheelbarrow manual (present manual);
• declaration of conformity;
• certicate of warranty.
Contact the Manufacturer or a
SPECIALIST TECHNICIAN
in the event of any issues.
OPTIONAL ACCESSORIES
CAUTION
• Inadequate optional accessories impair operation of the machine and may render it hazardous
and/or harmful to the environment. Use only original optional accessories as recommended by the
Manufacturer.
• For general requirements, safety instructions, installation and maintenance of optional accessories,
refer to the accompanying documentation.
The following range of accessories can be integrated into the standard equipment of the machine:
• hose reel (a variety of models depending on machine type);
• lances of a variety of types;
• nozzle heads of a variety of types;
• nozzles of a variety of sizes.
Contact your dealer for further information.
DESIGNATED USE
CAUTION
• The machine is exclusively designated for the following uses:
- spraying and crop protection treatment in gardens, greenhouses, lawns and small-scale crops;
- spraying of disinfectants and/or sanitizing products;
- spraying of detergents and dyes in aqueous solution;
- non food-grade water spraying.
• The machine is not designated for spraying:
- aqueous solutions with higher densities and viscosities than water;
- chemical solutions whose compatibility with the materials making up the machine itself is uncertain;
EN