EasyManuals Logo

Comet CBM Series Instructions For Assembly, Operation And Maintenance

Comet CBM Series
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40
NONROUTINE MAINTENANCE
CAUTION
Non-routine maintenance must be carried out only by a
SPECIALIST TECHNICIAN
.
For non-routine maintenance, follow the instructions in the table below.
MAINTENANCE INTERVALS INTERVENTION
At the end of every season or once a year. Check tightness of EVERFLO motor pump screws.
Check safety devices.
WARNING
The data shown in the table are for indicative purposes. More frequent intervention may be required
in the event of particularly heavy use.
HANDLING AND TRANSPORTATION
CAUTION
Carry out the procedures described in the section
“SHUTDOWN
before handling or transporting the
machine.
When transporting the machine, remember to anchor it rmly onto the transportation vehicle (using
ropes or other adequate systems) and empty the tank.
Grasp the handles (7) rmly, to prevent impact or shocks induced by the terrain from making you lose
your grip. Keep this in mind, especially when the tank is full and the ground is wet.
The machine must only be moved using the gripping points provided by the handles (7).
Do not wheel the machine on gradients of more than 2% or on very wet ground.
DEMOLITION AND DISPOSAL
CAUTION
Before scrapping the machine make it unusable, for example, by cutting the connection cables to the
battery and make harmless those parts that may pose a hazard to children who may use the machine
as a toy. Remember to completely empty the tank.
Demolition of the machine must only be carried out by qualied personnel and in compliance with the
legislation in force in the country where it has been installed (also refer to the information in the section
“IDENTIFICATION AND WARNING LABELS”
).
WARNINGS ABOUT THE MATERIALS REACH
CAUTION
Up-to-date information is available at:
www.comet-spa.com/it/company/legal/
TROUBLESHOOTING
CAUTION
Before carrying out any interventions, carry out the procedures described in the section
“SHUTDOWN
.
If correct operation of the machine with the assistance of the information contained in the following
table is not possible, contact a
SPECIALIST TECHNICIAN
.

Table of Contents

Other manuals for Comet CBM Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Comet CBM Series and is the answer not in the manual?

Comet CBM Series Specifications

General IconGeneral
BrandComet
ModelCBM Series
CategoryControl Unit
LanguageEnglish

Related product manuals