ComNav Technology K-series User Manual

K-series OEM Board User Guide
7
command interface, then enter ASCII commands you need.
3.3 Command Interface
Go to Command to send ASCII commands to receiver.
When inputting commands:
 Select and send proper commands, all commands are case insensitive: Log
version=LOG VERSION
 Press Enter button at the end of every command to check receivers’
feedback information or input another command
 For all programmatic commands, please refer to ComNav OEM Board
Reference Manual_V1.5
Go to Mode to check frequently used commands package, and it also supports click
Add to add commands you need.
3.4 NTRIP configuration
To easily test RTK fucntion through NTRIP protocol, firstly ensure your PC internet
connected, then go to Diff -> enter IP and port -> click Ntrip -> OK to go to NTRIP

ComNav Technology K-series Specifications

General

Brand	ComNav Technology
Model	K-series
Category	Motherboard
Language	English