ComNav G2 - Table 24 - G2 B Beacon Configuration Command Details

ComNav G2 & G2B Installation & Operation Appendices
Document PN 29010093 V1.5 - 67 - 16 December 2016
Command Description Parameter
Name
Parameter List
MAP To create, modify
and save the
frequency channel
map
C Channel number (1-32)
F Carrier frequency in Hz
SAVE Saves the channel map
SCAN FREQ Sets/gets the scanning mode
1 – Full range scanning at 500 Hz steps
2 – Channel map scanning. Up to 32
channels are available in the channel map
SIGTYPE Sets/gets the signal type for scanning
1 – 100 bps signals are scanned
2 – 200 bps signals are scanned
3 – 50 bps signals are scanned
4 – all signal types (200 bps, 100 bps, 50
bps) are scanned
Table 24 - G2B Beacon configuration command details