compact electric CDMRE 100 Manual Page 9
1230 Vienna, Großmarktstraße 22
PHONE: + 43 / 1 / 815-12-71-0 or + 43 / 1 / 815-51-74-0
FAX: + 43 / 1 / 813-64-21-21
Homepage: http://www.compactelectric.at
2.2. Changing the parameters
In order to change the parameters, press the Enter key in any menu and select the desired parame-
ters using the Up/Down key. Press the Enter key again to select the parameter and change the corre-
sponding value using the Up/Down key. Then confirm the change using the Enter key or discard it us-
ing the Escape key. If you do not enter any value for parameter change for 30 seconds, the menu re-
turns to the measured value display (applicable for all menu items, including the event log).
To Next Page
Loading...