Compaq Armada M700 Series Maintenance And Service Guide

2-8 Troubleshooting
Using Computer Setup
All information and settings in Computer Setup are accessed from the File, Security, or
Advanced menus.
NOTE: Your settings in Computer Setup are not affected by updating the system ROM.
To view information or change a setting in Computer Setup:
1. Turn on or restart the computer. When the blinking cursor appears in the upper-right
corner of the screen, press
F10
.
■
To change the language, press
F2
.
■
To view navigation information, press
F1
.
■
To return to the Computer Setup menu from anywhere in Computer Setup,
press
Esc
.
2. Select the File, Security, or Advanced menu.
3. To close Computer Setup and restart the computer
■
Select File!Ignore Changes and Exit, then press
Enter
.
or
■
Select File!Save Changes and Exit, then press
Enter
.
4. To confirm your choice, press
F10
.
File Menu
Begin here To do this
System information
■
View identification information about the
computer, docking base, and battery
packs.
■
View specification information about the
processor, memory and cache size, and
ROM date and family.
Save to floppy Save system configuration to a diskette.
Restore from floppy Restore system configuration from a diskette.
(The diskette contains your personal
configuration, so you should restore from the
diskette before using the System Recovery
CD-ROM.)
Restore defaults Replace configuration settings in Computer
Setup with factory default settings.
(Identification information is retained.)
Ignore changes and exit Cancel changes entered during the current
Computer Setup session, then exit and
restart the computer.
Save changes and exit Save changes, then exit and restart the
computer.

Compaq Armada M700 Series Specifications

General

Brand	Compaq
Model	Armada M700 Series
Category	Laptop
Language	English