Removal and Replacement Procedures 5-5
5.5 Preparing the Computer for Disassembly
1. Shut down the computer.
2. Disconnect the AC Adapter and all external devices connected to the computer.
3. Remove the battery pack from the battery bay (Section 5.6).
CAUTION: Failure to disconnect the AC Adapter from the computer and remove the
battery pack before removing and installing internal components can damage the
equipment.
4. Remove the hard drive (Section 5.7).
5. Remove MultiBay devices (Section 5.8).
NOTE: MultiBay devices other than MultiBay battery packs may be left inside the
MultiBay to provide balance when the computer is open. If installed, remove the
MultiBay battery pack.
6. Remove all PC Cards (Section 5.9).
To Next Page
Loading...
Need help?
General