5-8 Removal and Replacement Procedures
5.7 Hard Drives
Removing a Hard Drive from the Hard Drive Bay
Before removing a hard drive, back up all information on the hard drive.
1. Save all work, exit all applications, and shut down the computer.
2. Tilt the computer at an angle ➊ so the bottom of the computer is accessible
(Figure 5-7).
3. If the hard drive has been secured in the hard drive bay with a security screw ➋,
remove the screw using the security screwdriver provided with the computer.
Figure 5-7. Removing the Hard Drive Screw
To Next Page
Loading...
