Removal and Replacement Procedures 5-17
5.10 Modem/Combo Card
The computer can be equipped with a modem card, a network interface card (NIC), or
a combination modem/NIC (modem/combo) card.
1. Prepare the computer for disassembly (Section 5.5).
2. Turn the computer bottom side up with the rear panel facing forward.
3. Remove the two screws ➊ that secure the modem/combo card cover to the base
assembly (Figure 5-15).
4. Swing the right side of the cover up and to the left ➋.
Figure 5-15. Removing the Modem/Combo Card Cover
To Next Page
Loading...
