Compu-aire SYSTEM 2500 User Manual

Rev.01 03-27-17
Page 29 of 71
Compu-Aire
Main Menu
 Setpoint
 Temperature (Cooling/Heating)
 Humidity (If applicable)
 Discharge (If applicable)
 Dehumidification (If applicable)
 Economizer (If applicable)
 Cooling Assist (If applicable)
 Equipment Runtime
Each individual run hour can be reset via the reset button. Pressing the reset button will reset
counter to zero. The following operating counters are accessible.
 Evaporator fan
 Compressors
 Chilled water valve
 Humidifier
 Filter
 Electric reheat
 Alarm log
Active alarm: View current active alarms.
Alarm history: View previous stored alarms.
Reset alarms: Reset all active alarms. Note alarm history is stored in flash and cannot
be cleared.
Figure 9. Alarm Status

Compu-aire SYSTEM 2500 Specifications

General

Brand	Compu-aire
Model	SYSTEM 2500
Category	Controller
Language	English