Compu-aire SYSTEM 2500 - Password & Clock Settings

Rev.01 03-27-17
Page 49 of 71
Compu-Aire
7.7 Password
Only an admin can change user password. By default, technician password is not configured. Level 1
password allow changes of setpoint. Level 2 password grants access to technician menu. Level 3
password grants access to factory menu.
Figure 43. Password management
Note: Viewing settings require a password
Level 1 Password = 1 Level 2 Password = 2 Factory Setting = 1798
7.8 Clock Setup
The controller features an internal clock. Current time and date are backed up by an internal
Lithium-Ion battery. Consult the factory for battery replacement. To change the clock, press:
Menu->Time & Schedule. Tap on the selective field and enter new value. Press the “Sync” button
to synchronize new settings.
Figure 44 Date and time
7.8.1 Night Setback
The controller supports 7 days unoccupied and occupied modes. Separate temperature and
humidity setpoints are available and take priority when the night setback mode is active.