Alarm
The following alarm options are support in P-LAN network. Once the alarm from each unit is active, the
configured function shall take place.
Function Description Option
Temp hi/lo hi/lo temperature alarm ON/OFF
Hum hi/lo hi/lo humidity alarm ON/OFF
Compressor hi/lo pressure alarms for all circuits ON/OFF
Condensate Condensate leak detector ON/OFF
Smoke Smoke alarm ON/OFF
Pump Condensate pump alarm ON/OFF
Sensors Sensor failed alarm ON/OFF
Heater OL Heater overload alarm ON/OFF
Filter Dirty alarm ON/OFF
Keyboard Off External keyboard (optional) ON/OFF
Alarm Alarm function No action, next standby, all standby
Figure 27. Network setup
To Next Page
Loading...