NetPerformer SDM-8400 Hardware Installation Guide
1-2 Memotec
1.1 Product Overview
The SDM-8400 is a data-only integrated access device that supports multiple serial ports
and Ethernet. It increases serial port capacity at an enterprise network node while
minimizing the number of NetPerformer units required.
It can be used for high density serial port applications, central site satellite solutions and
other applications requiring serial port extension. To maximize serial port availability,
Ethernet is the preferred interconnectivity between the SDM-8400 and other NetPerformer
products.
The SDM-8400 offers all data characteristics that are available for serial and Ethernet
interfaces in NetPerformer software version 10.2.1 or higher. It provides bandwidth
optimization for both LAN and serial data, QoS, data compression, routing and
multiplexing.
1.1.1 Sales Contacts
To order NetPerformer units, cables and optional parts, contact Memotec Inc. or your
NetPerformer distributor. To contact Memotec:
•
Memotec
7755 Henri Bourassa Blvd. West
Montreal, Quebec
Canada H4S 1P7
• Telephone: +1 514.738.4781 during regular business hours, EST (GMT-05:00)
• Fax: + (1) 514 738 4436
• Web: http://www.memotec.com
To Next Page
Loading...