Troubleshooting I 6-37
6
Troubleshooting
Replacing Immersion Heaters
(Continued)
8 Lift the heating element out of the heater tank. Lift the element straight up.
9 Clean the heater tank. Remove any rust or solids that may have built up before
inserting the heater elements.
10 Replace the heater gasket if it is worn or cracked.
11 Reverse these steps to install the new heater element and reassemble the unit.
Heater cap
Immersion Heater
Heater gasket
Contact Conair
Parts and Service
Phone: 800-458-1960
From outside of the
United States,
Call: 814 437 6861