2-6 I Description
TW-S Control Features vs TW-V and TW-P
Model TW-S
Direct Injection
Closed Circuit - Common Source
Closed Circuit - Separate Source
Construction
Standard Pump Range
3/4 to 10 Hp
{0.56 to 7.45 KW}
Standard Heater Range 0 to 48 KW
Cast Heater / Pump
Incoloy Heaters
Silicon Carbide Seals
Pressure Gauges
250°F Setpoint Range
300°F Setpoint Range
Controls
PID Control
Setpoint / Actual Display
Password Protection
Modbus RTU via RS-485
SPI via RS-485
Retransmit Process Temp (4-20mA)
Hand Held Remote
Auto Restart Capability
High Temperature Safety
Mold Purge
Phase Detection Circuit
Heat Error for Heater Malfunction
Remote Start/Stop
120°F Air Purge Cancel
Quick Access Cool Down Mode
Status / Alarm Lights
Panel Mounted Status Lights 7 LEDs
Panel Mounted Alarm Lights 3 LEDs
Audible Alarm
Strobe Light
Model TW-P TW-V
Direct Injection
Closed Circuit - Common Source
Closed Circuit - Separate Source
Construction
Standard Pump Range
3/4 to 10 Hp
{0.56 to 7.45 KW}
3/4 to 10 Hp
{0.56 to 7.45 KW}
Standard Heater Range 0 to 48 KW 12 KW
Cast Heater / Pump
Incoloy Heaters
Silicon Carbide Seals
Pressure Gauges
250°F Setpoint Range
300°F Setpoint Range
Controls
PID Control
Setpoint / Actual Display
Password Protection
Modbus RTU via RS-485
SPI via RS-485
Retransmit Process Temp (4-20mA)
Hand Held Remote
Auto Restart Capability
High Temperature Safety
Mold Purge
Phase Detection Circuit
Heat Error for Heater Malfunction
Remote Start/Stop
120°F Air Purge Cancel
Quick Access Cool Down Mode
Status / Alarm Lights
Panel Mounted Status Lights 12 LEDs 1 LED
Panel Mounted Alarm Lights 5 LEDs 1 LED
Audible Alarm
Strobe Light
The TW-S Control
Control features on the TW-S Series Thermolators
Control features on the TW-P and TW-V Series Thermolators
PID Control
Phase
detection
indicates
incorrect
pump
rotation or
an open
electrical
leg.
Standard
Optional