Need help?Do you have a question about the Conair Thermolator TW-P and is the answer not in the manual?
General| Brand | Conair |
|---|---|
| Model | Thermolator TW-P |
| Category | Temperature Controller |
| Language | English |
Highlights critical safety warnings to prevent injury and equipment damage.
Details the procedure for safely isolating equipment using a lockout device.
Explains the operational principles of direct injection models.
Details the operational principles of closed circuit models.
Explains the operational principles of closed circuit separate source models.
Provides detailed technical specifications for the TW-S model.
Provides detailed technical specifications for the TW-P model.
Details site preparation, including power, ventilation, and clearances.
Explains electrical connection requirements, including voltage and phase sequence.
Covers the steps for connecting the main power supply to the unit.
Outlines procedures for verifying correct installation before operation.
Guides through the initial configuration and setup of the Thermolator.
Describes the control interface and features of the TW-S Thermolator.
Details the control interface and features of the TW-P Thermolator.
Provides step-by-step instructions for starting the Thermolator unit.
Details the correct procedures for shutting down the Thermolator unit.
Step-by-step instructions for removing and disassembling pump motors and seals.
Step-by-step instructions for reassembling pump motors and seals.
Explains how to diagnose problems using alarms, error codes, and machine state.
Lists common controller alarms, their possible causes, and solutions.
Details the logic behind controller faults and their system responses.
Describes various unit faults, their causes, and recommended solutions.
Troubleshooting steps for when the unit fails to power on.
To Next Page
