6
Inspect the Fasteners
Be sure all fasteners are tight and have
not become loose during use. If your
SkiErg is wall mounted, examine the
wall mount fasteners carefully.
Inspect the Top Bracket Pulleys
Be sure the pulleys spin freely in the
pulley housings and that the pulley
housings swing freely in the pulley
brackets.
As needed
• CleansurfacesoftheSkiErg,
includingoororoorstandbase,
with any non-abrasive household
cleaner.DONOTsprayanyuid
onto the PM.
• Dustandlintcancollectinside
oftheywheelenclosure.This
buildupcanrestrictairowreducing
the resistance of the fan. The outer
cover of the fan enclosure can be
removed for cleaning by removing
the four screws that hold the cover
together. See illustrations.
IMPORTANT:
The Performance Monitor
(PM) is a sealed unit. DO
NOT TAKE APART. Any
attempt to disassemble
will void warranty. Contact
Concept2 if there are
problems with the PM.
Flywheel Opening and Cleaning
SKIERG WARRANTY
Concept2 SkiErgs are backed by a limited 2 year and 5 year
warranty. For complete warranty information in the U.S. and
Canada, visit concept2.com/ski. For warranty information
outside the U.S. and Canada, contact the authorized Concept2
dealer in your territory. A list of authorized Concept2 dealers
can be found at concept2.com/international. If you do not find
a local dealer in your territory visit concept2.com/ski or email
info@concept2skierg.com.
2.
3.
1.
5.
6.
4.
7.
Pulley Housing
Pulley