Concept2 SkiErg Use Manual

6
0613
Inspect the Fasteners
Be sure all fasteners are tight and have
not become loose during use. If your
SkiErg is wall mounted, examine the
wall mount fasteners carefully.
Inspect the Top Bracket Pulleys
Be sure the pulleys spin freely in the
pulley housings and that the pulley
housings swing freely in the pulley
brackets.
Pulley Bracket
Pulley Housing
Pulley
As needed
• CleansurfacesoftheSkiErg,
includingoororoorstandbase,
with any non-abrasive household
cleaner.DONOTsprayanyuid
onto the PM.
• Dustandlintcancollectinside
oftheywheelenclosure.This
buildupcanrestrictairowreducing
the resistance of the fan. The outer
cover of the fan enclosure can be
removed for cleaning by removing
the four screws that hold the cover
together. See illustrations.
IMPORTANT:
The Performance Monitor
(PM)isasealedunit.DO
NOT TAKE APART. Any
attempt to dissassemble
will void warranty. Contact
Concept2 if there are
problems with the PM.
Flywheel Opening and Cleaning
SKIERG WARRANTY
Concept2 SkiErgs are backed by a limited 2 year and 5 year
warranty. For complete warranty information in the U.S. and
Canada, visit concept2.com/ski. For warranty information
outside the U.S. and Canada, contact the authorized Concept2
dealer in your territory. A list of authorized Concept2 dealers
can be found at concept2.com/international. If you do not find
a local dealer in your territory visit concept2.com/ski or email
info@concept2skierg.com.
2.
3.
1.
5.
6.
4.
7.

Concept2 SkiErg Specifications

General

Resistance Type	Air resistance
Monitor	PM5
Drive Mechanism	High-strength cords
Power Requirements	2 D cell batteries
Maximum User Weight	227 kg (500 lb)
Construction	Steel and aluminum
Storage	Can be stored upright
Display Metrics	Time, distance, pace, calories, watts, stroke rate
Space Recommended for Use	61 cm x 122 cm (24 in x 48 in)
Warranty	2-year limited warranty