38
4. Software Installation
NOTE: Do not connect the camera to your computer before the camera
drivers and software installation is completed.
Installing the Camera Drivers and ArcSoft Applications:
1. Insert the CD-ROM included in your camera's packaging into your
computer's CD-Rom drive.
2. The installation screen will appear on the computer monitor. Follow the
software installation instructions on your screen to install the software.
3. When the CD-Rom installation is finished, set the camera to PC driver
mode and connect your camera to the computer to complete the
camera driver installation. (P. 39)
4. Follow the on-screen instructions to complete the installation.
5. Reboot your computer before transferring files.
NOTE: If your computer has the CD-ROM automatic installation
disabled, click on START. Select MY COMPUTER and locate the CD-ROM
Drive. Double click on the CD-ROM Drive icon to show its contents.
Double-click on the file named SETUP.EXE and follow the instructions
on your screen.
Note for Mac users: It is not necessary to install the software in the
CD-Rom. Please refer to p.42-43 for instructions on how to use the
Mass Storage feature.
To Next Page
Loading...
