Why my CONCORD Duo 2000 Digital Camera cannot turn on?
Your CONCORD Digital Camera might not be turning on because the battery was not installed correctly. Make sure to install the battery correctly, following the direction indicators inside the battery cover. Alternatively, the battery might be dead or weak, in which case you should replace it. Also, check that the battery compartment is closed properly.
Why flash did not work on my CONCORD Digital Camera?
The flash on your CONCORD Digital Camera might not have worked because there was sufficient light for the shot, and the camera's electronic light sensor didn't fire the flash. This is normal. It could also be that the camera’s flash has been turned off, so try turning on Automatic Flash. Verify that the LED has stopped blinking before taking the picture. Replacing the battery might also help if the current one is empty.
What to do if my CONCORD Duo 2000 cannot take a picture/video clip?
If your CONCORD Digital Camera cannot take a picture or video clip, it might be due to several reasons. First, the memory could be full, so try deleting some pictures. Second, ensure that the camera is set to picture/video clip taking mode. Also, check if the power is off or if the camera is in "Auto Power Off" mode and turn the power on.
Why is my CONCORD Duo 2000 Digital Camera flash picture too dark?
If your flash pictures are too dark, it could be because the subject is too far away; try moving the subject closer. Also, make sure the flash is turned on.
How to fix poor quality of CONCORD Digital Camera web camera video/picture/video clip?
If your web camera video, pictures, or video clips have poor quality, it could be due to poor lighting. Try taking the web camera/picture/video clip in better lighting. Another reason might be a dirty lens; clean it with a soft cloth. Also, make sure the subject is not too close; stand at least 3.9ft (1.2m) away from the subject.
What to do if flash picture taken with CONCORD Duo 2000 is too light?
If the flash picture taken with your CONCORD Digital Camera is too light, the subject might be too close. Try moving the subject further away.
Why LCD is not displaying anything on my CONCORD Digital Camera?
If the LCD on your CONCORD Digital Camera is not displaying anything, it could be because the LCD is turned off. Try turning it on by pressing the appropriate button. Another reason could be a low battery level; try replacing the batteries.
Why is daylight picture/video clip taken with CONCORD Duo 2000 Digital Camera too dark?
If your daylight picture or video clip is too dark, it could be because the subject is in front of bright light. Try changing the subject’s position.
Why is the image blurred when looking through the viewfinder of my CONCORD Duo 2000?
If the image is blurred when looking through the viewfinder of your CONCORD Digital Camera, the viewfinder might be dirty. Clean it with a soft cloth or cotton swab.
Why is part of the picture/video clip missing on my CONCORD Duo 2000?
If part of the picture or video clip is missing, something might have been blocking the lens when taking the picture. Keep hands, fingers, etc. away from the lens.
Federal Communications Commission (FCC) warnings and compliance statements for the device.
Essential safety and handling guidelines to prevent damage or malfunction.
Step-by-step instructions for inserting and checking AA LR6 batteries.
Guidance on powering the camera on and off, and understanding the ready LED indicator.
Step-by-step guide to capturing still photographs with the camera.
Instructions for recording video clips using the camera.
Options for deleting single files or all files from the camera's memory.
Steps for establishing a USB connection between the camera and computer.
Using the camera as a webcam or for photo impression with PC driver.
Utilizing the camera as an external hard drive for file access.
Federal Communications Commission (FCC) warnings and compliance statements for the device.
Essential safety and handling guidelines to prevent damage or malfunction.
Step-by-step instructions for inserting and checking AA LR6 batteries.
Guidance on powering the camera on and off, and understanding the ready LED indicator.
Step-by-step guide to capturing still photographs with the camera.
Instructions for recording video clips using the camera.
Options for deleting single files or all files from the camera's memory.
Steps for establishing a USB connection between the camera and computer.
Using the camera as a webcam or for photo impression with PC driver.
Utilizing the camera as an external hard drive for file access.
General| Brand | CONCORD |
|---|---|
| Model | Duo 2000 |
| Category | Digital Camera |
| Language | English |
To Next Page
