Contec ADI16-4(USB) User Manual

6. Connecting with Expansion Accessories
ADI16-4(USB)
47
6. Connecting with Expansion Accessories
When lacking of analog input channel used to connecting external device, you have to purchase a new
same module, and thus it not only increases cost but also doubles installation space. At the same time,
adding channels is considered when designing this module, and additional module can be connected by
the connector on module side, so that not only the cost but also the installation space is controlled.
Up to 3 modules ADI16-4(FIT)GY can be connected when adding channels.
In the case of combination of the USB module “ADI16-4(USB)” and three expansion modules
“ADI16-4(FIT)GY”, it is possible to control 16 channels input by way of one USB port.
Table 6.1. Expansion Modules
Type Input channel Current consumption Function
ADI16-4(FIT)GY 4 +5VDC 300mA(Max.) Expansion module for ADI16-4(USB)
Figure 6.1. Expansion Modules
Points
- Up to 3 modules can be connected.
- Please use the supplied AC adapter when adding modules.
- Modules with different function from the USB module can not be connected.
- The analog grounds of both USB module and expansion module are isolated from each other.
With the same name Up to 3 expansion modules
can be connected.
0
2
4
5
6
7
9
A
C
E
F
8
0
2
4
5
6
7
9
A
C
E
F
8
ADI16-4
Device
ID
0
4
7
3
6
2
5
1
RANGE
CH0
CH1
CH2
CH3
+
-
AG
+
-
AG
+
-
AG
+
-
AG
ADI16-4
Device
ID
0
4
7
3
6
2
5
1
RANGE
CH0
CH1
CH2
C
H3
+
-
AG
+
-
AG
+
-
A
G
+
-
A
G
ADI16-4
Device
ID
0
4
7
3
6
2
5
1
RANGE
CH0
CH1
CH2
C
H3
+
-
AG
+
-
AG
+
-
A
G
+
-
A
G
ADI
16-
4
Device
ID
0
4
7
3
6
2
5
1
RANGE
CH0
CH1
C
H2
CH
3
+
-
AG
+
-
AG
+
-
AG
+
-
AG

Contec ADI16-4(USB) Specifications

General

Brand	Contec
Model	ADI16-4(USB)
Category	I/O Systems
Language	English