Control Techniques M'Ax 406

*
M’Ax User Guide 107
Issue Number: 4
Appendix H Storage and
Transfer of
Parameter Values
Figure H-1 Parameter-value storage locations and transfer
directions
S
S
S
S
S
S
S
S
S
Parameter
set at (2)
Prog
0.50
Parameter
set at (1)
rEAd
0.50
Parameter set at 0.50
no , boot1 or boot2
(0) (3) (4)
Parameter
preset at (3)
0.50
boot1
Parameter
preset at (0)
0.50
boot2
Parameter
preset at (4)
0.50
boot2
Parameter
preset at (0)
no
0.50
Parameter
preset at (0)
no
0.50
Parameter
preset at (save)
1000
XX.00
P
arameter values are immediately
c
opied in the indicated direction
P
arameter values are copied in the
indicated direction at the next
power-up
P
arameter values are copied in the
indicated direction at power-down
Main parameter values are copied,
(excluding the S-parameter values)
S
All parameter values are copied,
including the S-parameter values
S
O
nly S-parameter values are copied
S
K
ey
Flash memory RAM EEPROM
Control and
monitoring
Control circuits