Control Techniques M'Ax 406 User Manual

*
M’Ax User Guide 31
Issue Number: 4
6 Setting Up the Drive for
Basic Applications
The setting-up instructions are presented in the form of flow diagrams,
as follows:
Procedure for version _AN
• Power-up routine
• Select speed reference routine
• Ramps routine
•Startingroutine
Procedure for version _SL
(control via serial communications; also suitable for version _AN)
• Power-up routine
• Select speed reference routine
• Ramps routine
•Startingroutine
Setting up requires you to adjust parameters; information on these is
giveninChapter8Menu 0 Parameters on page 44 and Chapter 9
Advanced Parameters on page 51.
If any of the following apply...
• An external braking resistor is to be used
• The analog input is to be calibrated
• The programmable parameter is to be set up
... before continuing, follow the instructions in Chapter 7 Security and
Accesssing the Advanced Parameters on page 42. When setting up is
completed, follow the instructions for locking security.

Control Techniques M'Ax 406 Specifications

General

Brand	Control Techniques
Model	M'Ax 406
Category	Servo Drives
Language	English