Control Techniques M'Ax 406 User Manual

Addendum
The following parameters stated in the M’Ax User Guide are not operational with the
current Drive sofware version:
8.59 Status line indicator
8.60 Status line output enable
11.65 SLM encoder mode select
The following parameters are not available with the current Drive software version:
3.56 F/D mode select for simulated encoder output
6.35 FORWARD LIMIT switch
6.36 REVERSE LIMIT switch

Control Techniques M'Ax 406 Specifications

General

Brand	Control Techniques
Model	M'Ax 406
Category	Servo Drives
Language	English