Carrying
Locking
4
EZ Rider Models
Fig.13
Fig.12Fig.11b
EZ RIDER / CONVERTIBLE / LITE RIDER
Folding
1. Flip footplates to side.
2. Flip back armrests.
3. Unlock brace by pushing in
pin and sliding tube to the
right or left. Fig. 11a (For
EZ14/16/18 and CV14/16/18,
pull upward on brace.
Fig. 11b)
4. Push lock down. Fig. 12
5. Grasp one handle and pull up
on center of seat. Fig. 13
6. Lay chair flat with seat facing upward. Push on seat tubes
to complete fold.
Caution: To prevent
injury, keep hands clear
of moving structure
during folding.
When carrying or lifting chair, grasp the foam handle
near locking bar
.
To keep chair folded, rotate
locking bar over front legs.
Fig. 14
Fig.14
To Next Page
Loading...
