Quick Setup with CME 2 Xenus XSL User Guide
108 Copley Controls Corp.
5.10.2.11
For a resolver (-R) version of Xenus, click Next to open the Resolver Phase Angle
Setup screen.
5.10.2.12 Click Start to start the resolver phase angle setup.
The message area displays status messages.
5.10.2.13 Click Finish to close the screen and save values to flash memory
OR
to close the screen without saving changes, click Cancel.
5.10.2.14 If the Auto Phase algorithm does not produce desired results, try adjusting the Auto
Phase Current and Increment Rate values, using the guidelines in
Guidelines for Choosing Auto Phase Current and Increment Rate Values (p. 109).
5.10.2.15 If desired results are not obtained, proceed to Manual Phasing (p. 145).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
