108 ProLine 124-221-321-324 Operator manual
500
750
1000
8
5.1 INSTALLATION AREA
WARNING
Install the machine in compliance with all the applicable safety standards, includ-
ing, but not limited to, those issued by OSHA.
CAUTION
IMPORTANT: for the correct and safe operation of the equipment, the ambient lighting
level should be at least 300 lux.
CAUTION
IMPORTANT: Do not install the machine outdoors. It is designed to be used in closed,
covered areas.
RISK OF EXPLOSION OR FIRE. Do not use the machine in areas that could be ex-
posed to inflammable vapours (petrol, paint solvents, etc.).
Do not install the machine in a narrow area or position it below floor level.
DANGER
Install the tyre changer in the chosen work
position, complying with the minimum
clearances shown in fig.8.
The support surface must have a load-bear-
ing capacity of at least 1000 kg/m
2
.
Ambient working conditions
- Relative humidity 30% ÷ 95% without con-
densation.
- Temperature 0°C ÷ 50°C.
WARNING
Whenever the machine is disconnected from the pneumatic line for long periods,
before restoring the pneumatic supply, check the configuration of the pedals as
shown below.
To Next Page
Loading...
