112 ProLine 124-221-321-324 Operator manual
3 Mounting/ demounting tool (to mount and demount the tyre from the rim).
4 Tilting movable pole.
5 Locking wedge (for the correct locking of the rim to the turntable).
6 Turntable (rotary platform supporting the wheel).
7 Movable pole control pedal (4) (stable two-position pedal for tilting the pole unit).
8 Locking wedges (5) opening and closing control pedal (stable three-position pedal
for opening and closing wedges).
9 Bead breaker control pedal (monostable pedal to operate the bead breaker shoe
(11).
10 Turntable (6) rotation control pedal, two-position pedal (three-position only 2V):
11 Bead breaker shoe (movable shoe to detach the bead from the rim).
12 Filter Regulator + Lubricator Unit (regulates pressure, filters, removes water and
lubricates the compressed air supply).
13 Rim rest.
14 Bead lifting lever (raises and positions the tyre bead on the mounting/ demounting
tool).
15 Pressure gauge (reads the wheel pressure), (T.I. version only).
16 Deflation button (button to remove the extra air inside the wheel), (T.I. version only).
17 Doyfe connector (connector to apply to the tyre valve for inflation).
18 Safety relief valve (max. pressure 11 bar) (T.I. versions only).
19 Air tank (T.I. versions only).
20 Inflation pedal (T.I. versions only).
21 Inflation gun.
22 Shoe guard (option)
23 Vertical pole
24 Vertical arm (to position the mounting/demounting tool).
25 Vertical arm lever locking
26 Swivelling arm.
27 Swivelling arm adjustment handle.
28 Safety valve
29 Round pole
To Next Page
Loading...
