Corghi ProLine 60 - Page 54

54 ProLine 60 - Operator's Manual
Select to setup the on/off
of the hood function.
Press to confirm after confirmation.
1.3 APP (minimum unbalance setup)
In the upper state, press to enter the
APP setup.
Press to enter the setup.
Select the corresponding unit.
Press key to confirm the entrance.
Select to select the unba-
lance unit is 1Gr or 5Gr.
Press key to confirm.
1.4-BIP (beeper setup)
Press to setup the on/off of the beeper.
Press to confirm the entrance.
Select to setup the on/off
of the beeper.
Press to confirm.
Press to enter the sub-level.
1. “SET”- “UP”
Press to enter the special function setup
program.
2. Option: “IN”- “TES” “CAL” - “CAL”