corob D700 extra - Installation

SHIPPING, HANDLING AND UNPACKING - 19
COROB™ D600 - D700 - D800 EXTRA
4.3.2 Standard material supplied
After unpacking the machine, make sure the following items are present:
7
8
1
3
2
5
6
4
WARRANTY
10
9
12
13
11
Figure 9
1. Power supply cable. 2. Computer power cables.
3. USB cable. 4. RS232 cable.
5. Spare fuses. 6. Panel key.
7. Phillips screwdriver. 8. Spare parts for humidier cap.
9. Equipment software tools standard CD.
10. User’s manual, CE declaration of conformity and
installation and warranty start form.
11. T-wrench (only with punching device).
12. Tool for punch removal (only with punching
device).
13. Manual plugger (only with punching device).
Depending on the options specied on the purchase order, you may also nd:
• Management software and protection key.
• Any accessories to be installed on the machine.
Make sure that all of the above items are included in the packing; if not, contact the manufacturer.
4.4 Installation
Once the machine has been unpacked and placed in its operating site, it must be installed.
WARNING
Only qualied and appropriately trained personnel are authorized to install the machine.