14 - SHIPPING, HANDLING AND UNPACKING
COROB™ FIRST 70
4.3 Unpacking and placement
1 x 15 mm
2 x 17 mm
To remove the mounting brackets that secure the
machine to the pallet
1 x 14 mm
1 x 17 mm
To adjust machine feet
DANGER
The following procedure must be carried out by at least 3 people.
Store the packing material for future use, or dispose of it according to current regulations. In any case, we
recommend that you keep it for the entire duration of the machine warranty.
Make sure the packing has not suffered any damage or tampering during shipping; if so, contact the
authorized technical service or your dealer.
1. Cut the straps wrapped around the packing.
2. Remove the covering from the pallet.
3. Remove machine wrapping.
2 3
1
Figure 3
DANGER
Should the machine appear damaged during shipping, do not attempt to start it and contact the authorized
technical service or dealer.
4. Remove the two brackets A that hold the machine to the base of the pallet.
To Next Page
Loading...
