corob FIRST 70 - Using the Adapter for Smaller Cans

USING THE DISPENSER - 25
Quart-size can (1 liter)
Pint-size can (0.5 liter)
with sliding cap with sliding autocap
2. Place spacer A aligned with the
position indicators marked on the
shelf surface.
2. Join spacer A with spacer B,
making sure that the COROB
mark is straight so that the
spacer prole can open
and hold the humidier cap
open, then place the adapter
aligned with the position
indicators marked on the
shelf surface.
2. Join spacer A with spacer
B, then place the adapter
aligned with the position
indicators marked on the
shelf surface.
3. Place the can on the adapter.
1
2
3
A
B
A
B
Figure 11