29
PUMP GROUP, MIXED DN 25 WITH WEATHER-COMPENSATED ACTUATOR
ATTENTION
Damage to property!
The location of installation must be dry, load-carrying, frost-proof and protected
against ultraviolet radiation in order to prevent material damage of the installation.
The pump group can be mounted either on a distribution manifold or on a wall bracket
(KBN: C2PWH). The distribution manifold, the wall bracket for the distribution manifold and
the Premium wall bracket for the pump group are not included in the scope of delivery.
7.1 INSTALLATION ON
A DISTRIBUTION MANIFOLD
The distribution manifold and the wall bracket for distribution manifolds are not included in the
scope of delivery.
Please observe the separate instructions regarding the distribution manifold for the assembly
of the distribution manifold and the installation of the pump group on the distribution manifold!
7 INSTRUCTIONS FOR USE /
INSTALLATION
To Next Page
Loading...
Need help?
General
