Cosmote Speedport Plus 2 User Manual

49
1. Click on General .
2. Enable Band Steering. The Band steering is enabled by default. In order to
use this feature, SSIDs of 2.4GHz and 5GHz bands must be the same, and
Band Steering must be enabled in both SSIDs.
3. Enable Radio (2.4 & 5 GHZ) .
4. Configure the following parameters (Table 6-1):
5. When you have finished configuring your settings, confirm the changes by clicking
the Apply button. Click the Cancel button if you do not want to save your changes.

Cosmote Speedport Plus 2 Specifications

General

Brand	Cosmote
Model	Speedport Plus 2
Category	Network Router
Language	English