Figure 5-3 Set up Grid Standard
6. Setting the Time. From the previous menu, press ESC to return to the
System Parameters menu. Select Time and press ENT. Scroll up/down to
select the numerical value, then press ENT to go to next option. e.g.: Year
to Month, press ESC to go to last option. e.g.: Month to Year. Finally Press
the ENT key to confirm the setting. (Press more than 1 second to go
to last position of the number when setting the parameters. e.g: 2008 to
2008. Press more than 1 second to go to the next position of the
number when setting the parameters. e.g: 2008 to 2008.)
To Next Page
Loading...
