CPS SCA25KTL-DO/US-208 - Setting

76
6.2 Setting
Move the cursor to Setting in the main interface. Press the ENT key to be
prompted for the password: “1111” as shown in Figure 6-3. Enter the password
number by pressing and , selecting the numeral, and pressing the
ENT key to input and proceed to the next digit of the password number. Once
all four digits are entered, press the ENT key to confirm the password or Press
the ESC key to go back to Setting.
Password
Please enter Password：
1 1 1 1
Figure 6-3 Input Password Number
The Setting menu contains eight submenus: System Parameters, Control
Command, Protection Parameters, LVRT/HVRT Setup, Power Derating
Setting, Reactive Power Derating Setup, ARC Parameters, and Other
Parameters.