CPS SCA25KTL-DO/US-208 - Reactive Power Derating Setup

97
6.2.6 Reactive Power Derating Setup
The Reactive Power Derating menu is used to set the Grid reactive power
derating parameters including PF parameters, Qu parameters, etc. The
parameters as shown in Error! Reference source not found..
Grid Reactive Power Derating
P1/5
CtrMode
3：PFset
Percentage
0.0%
PFSetValue
1.000
ReactivePowerOver
Disable
QuCurveQ2i
P4/5
5.0%
20.0%
44.0%
QuCurveTriPower
QuCurveUndoPower
Reactive Power vs Grid Voltage
QuCurveVref
QuCurveVrefTms(s)
QuCurveOLRspTms(s)
QuCurveVrefAutoEn
100.00%
300
5.0
Disable
PF vs Grid Voltage
PFCurveP1
P2/5
PFpCurvePF1
100.0%
1.000
50.0%
PFpCurvePF2
PFCurveP2
PFCurveTriVolt
PFCurveUndoVolt
-0.900
100.00%
90.00%
Reactive Power vs Grid Voltage
QuCurveQ1
QuCurveU1
P3/5
-44.0%
108.00%
0.0%
102.00%
98.00%
0.0%
92.00%
QuCurveU2
QuCurveQ2
QuCurveU1i
QuCurveQ1i
QuCurveU2i
LVRT/HVRT Setup
Setting
P1/2
System Parameters
Protection Parameters
Power Derating Setup
Reactive Power Derating Setup
ARC Parameters
Control Command
Grid Reactive Power Derating
QPCurveQ1
QPCurveP1
P5/5
0.0%
50.0%
0.0%
20.0%
100.0%
-44.0%
1.0
QPCurveP2
QPCurveQ2
QPCurveP3
QPCurveQ3
QpCurveRspTms
Figure 6-145 Reactive Derating Setting