CPS SCA25KTL-DO/US-208 - Control Command

80
标题
- +
Figure 6-7 LCD Contrast Grade Setting
8. Clear Running Record. Clear the running information. This contains
normal operating information such as when the inverter starts up and
shuts down.
9. Clear Fault Record. Clear the fault record for the inverter. The Fault
Record can store up to 128 faults.
6.2.2 Control Command
There are five submenus in the “Control Command” menu:
Control Command
Factory Defaults
ARC Detect
Force Restart
ARC Clear
P1/2
Control Command
P2/2
PV1 PV2
PV3
Time
Vmppt(V)
Pmppt(kW)
Udc(V)
Idc(A)
0
0 0
0.0
0.0
0.0
0.0
0.0 0.0
0.0 0.0
0.0
MPPT Scan
Figure 6-8 Control Command Setting
1. Force Restart. If a fault shutdown happens, a severe fault may have
occurred inside the inverter. The user can perform a force reboot for
one time in this menu if the user needs to restart the inverter.